Manufacturing nitric, citric, phosphoric, phosphorus, and other acidic liquids? For over 60 years, Murray’s mix plants have set the standard for quality and efficiency in the industry. Our mix plants can be easily configured to your facility and liquid mix requirements. All mix plants are built with NTEP-approved components and to weights-and-measures specifications.

Standard Murray Mix Plant with Acid-Grade Fertilizer Kit

Tank:

  • 10 ton/2500 gallon, 15 ton/3500 gallon, or 25 ton/6000 gallon
  • 316L stainless steel tank
  • 4 stainless steel baffles for improved agitation
  • Heating/cooling coils
  • 36” diameter 1/2” square stainless steel tank lid with 24” x 36” manway
  • Perforated tank sump screen
  • Sample port
  • Stainless steel vortex breaker
  • Stainless steel temperature gauge
  • Mechanical tank rinse

Agitation:

  • 316L Stainless steel agitator frame
  • Lightnin series 10 mixers
  • Specifically engineered to mix tank size
  • 48” diameter agitator blades
  • 82 RPM high volume agitation

Pump:

  • 10 ton/2500 gallon: 
    • 4”x 3”- 10 A-70 A.N.S.I. specification chemical process pump with stainless steel impeller and sever service cartridge seal
    • 400 GPM capacity
    • 20 hp high efficiency motor with 208/240/480 volt capabilities
  • 15 ton/3500 gallon:
    • 6”x 4”- 10 A-80 A.N.S.I. specification chemical process pump with stainless steel impeller and sever service cartridge seal
    • 600 GPM capacity
    • 25 hp high efficiency motor with 208/240/480 volt capabilities
  • 25 ton/6000 gallon: 
    • 6”x 4”- 13 A-80 A.N.S.I. specification chemical process pump with stainless steel impeller and sever service cartridge seal
    • 900 GPM capacity
    • 40 hp high efficiency motor with 208/240/480 volt capabilities

Scales:

  • Toledo multi mounts 10,000 pound load cells
  • Rice Lake 480 legend series indicator with stainless steel enclosure
  • All components are NTEP approved

Tank Plumbing:

  • 2 - 3” ANSI flanged eductor ports
  • 3"-4" 316L stainless steel eductor with 15" 316L stainless steel funnel
  • 3” flanged recirculation port with diverter deflector
  • Self-draining sump to eliminate residual product
  • 6” flanged sump outlet

Manual Controls:

  • Work area with stainless steel top
  • Manual “MAC” lever actuated air control valves
  • Motor control and motor starters mounted in a NEMA 4X enclusres and assembled to UL508A standards in our electrical assembly area

Pump and Tank Frame:

  • Tank frame constructed of painted structural 8” C channel
  • Pump frame constructed of painted structural 6” C channel

Compatible with: MEI Mix Plant Manager Software & Murray Interface


 

Dry Material Hopper & Auger Kit

  • 5-10 ton hopper with screen
  • Air operated slide gate
  • 21ft stainless steel auger

Options: Belt veyor instead of auger, declining weight system

Compatible with: All MEI mix plants with Over-the-top pumping


 

Suction Manifold Kits

These traditional, economical kits are ideal in scenarios where potential cross-contamination is of minimal concern and speed is not of primary importance.

  • 316L Stainless steel suction manifold
  • 4 to 8 products


 

Overhead Plumbing & Support Kits

For increased speed, improved equipment longevity, and reduced cross-contamination, overhead plumbing is desirable.

  • 316L Stainless steel suction manifold
  • 4 to 8 products


Digital 316L Temperature Gauge

Monitor tank temperature digitally remotely. Replace standard dial temperature gauge with digital temperature gauge.


 

304 Stainless Steel Frames

Upgrade your mix plant frame for improved weather and chemical resistance and overall plant longevity. Replace carbon steel mix plant and agitator frames with 304 stainless steel frames.