Murray Fertilizer Manufacturing Systems

The Murray Equipment 10 and 15 ton fertilizer manufacturing plant is designed for fast, accurate, and dependable operation. This plant is a multi-purpose liquid fertilizer mixing system capable of manufacturing high quality suspension fertilizers using map, dap, phosphoric acid, NH3 or Aqua Ammonia, and prescription blending solution fertilizers. Available with many options, it has been designed with quality components and can be operated by one man manually or can be easily automated.

For a larger picture, click here.

Drawings & Dimensions

For a larger picture, click here.
 
 

 agitate.jpg (41267 bytes)  For a larger picture, click here.

Standard Features:

  • The Murray 10 and 15 Ton mix plants have met accuracy requirements of Weights and Measures, National Bureau of Standards, and NTEP for resale devices.

  • The 10 ton plant utilizes a 10 gauge stainless steel 2500 gallon tank with 4 stainless steel baffles.

  • The 15 ton plant utilizes a 10 gauge stainless steel 3500 gallon tank with 4 stainless steel baffles.

  • Electronic 3 load cell scale system. No moving parts to maintain or faiI. Digital readout is enclosed in a N.E.M.A. stainless steel box.

  • 4" X 3" A.N.S.I. A40 chemical process pump. 500 G.P.M. capacity. Features stainless steel impeller and severe service mechanical seal. 25 Horse Power motor provides excellent shear and keeps energy costs to a minimum. A 6" x 4" A.N.S.I. A80 chemical process pump for the 15 ton mix plant.

  • 10 HP, 84 RPM agitator, 36" stainless steel blades, 2-1/2" stainless steel shaft. Down pumping sweeps bottom of tank and helps stop vortexing.
  • Convenient work area with stainless steel top. All valves, pump and agitator controls may be operated from this location. Electric starters and switches are mounted in corrosion proof boxes.
  • Stainless steel manifold with 6" trunk line. Four 4" air actuated inlet valves. Inlet manifold may be easily expanded for additional products. The 3" stainless steel discharge manifold also features air actuated valves. Manifolds are designed to allow the product to be pumped back to the inlet lines. All valves are stainless steel fitted.
  • 2" sparge line is flanged on both ends for easy clean out.
  • Stainless steel rinse ring for water flush.
  • Stainless steel 1/2" diamond sump screen.

  • All equipment and controls are mounted to a skid frame to allow for easy installation.

OPTIONAL EQUIPMENT
  • All stainless steel frame.
  • 316 stainless steel tank, pump and manifold
  • 3" or 4" eductor for adding liquid or dry materials to batch, complete with stand, valve and stainless steel cone.
  • A 12" drop valve can be used for dump pit operation.
  • NH3 injection system.
  • Plant can be built with either a left or right hand manifold

 

 
 
 
Last Updated: 12/21/2006

(C)2005 Murray Equipment, Inc.

Murray Equipment, Inc. 2515 Charleston Place Fort Wayne, Indiana 46808

Toll Free: (800) 348-4753 or (260) 484-0382