Mini Bulk Meters and Fittings
|
|
Murray Equipment offers a wide rage of Mini Bulk Fittings. All available 15 and 30 Gallon Drum fittings such as Micromatic, checkvalves, spigots, vents and seal wires. For Mini Bulk and IBC's Murray offers precoupled hoses, meters, calibration containers, drybreaks and delivery nozzles. |
|
| Select a Sub-Group from the list or scroll to
browse. |
|
|
| |
| Micro-Matic Dry-Breaks |
| Micro Matic dry break fittings available include drum fittings with either national pipe thread or buttress thread, and coupler valves that will attach to those drum fittings for closed-system product handling. Micromatic fittings are made of 316 stainless steel, with Viton elastomers. |
| |
| Drum Fittings |
| Murray Equipment offers a full line of Tank and Drum Acessories. Drum Spigots, check valves, seal wires and Micromatic Fittings to complete your drum and tank assembly. Please call Murray for you specific application and packaging requirements. |
| |
| Parker Hannifin Dry-Breaks |
| Parker Hannifin polypropylene drybreaks have 1"Female NPT inlet connections with viton seals and stainless steel springs. They are most commonly used on mini-bulk tanks, refillable drums and hose connections. The female drybreak has 1" Female NPT inlet connection, the male drybreaks are available with 2" Male NPT and 2" Buttress connections to screw into tanks , IBC's and refillable containers both with |
| |
| EPDM Precoupled Hose |
| EPDM Precoupled hoses are available in 3/4" and 1" MNPT in numerous lengths and materials are available for hose barbs. |
| |
| Solvent Precoupled Hose |
| The 414 Series solvent hose, with a lightweight polyethylene lined rubber blend inner tube, has excellent compataibility to most chemicals, paints, solvents, and lacquers. Precoupled hose are available in standard sizes or can be created to meet your requirements. Sizes available are 3/4" and 1" with Polypropylene male threaded ends with swedged collars. Rated at 75 PSI at 70 Degrees F. |
| |
| Flowserve Plastic Meters |
| Flowserve electronic SEM-10 flow meters have a polypropylene body and ryton metering chamber for compatibility with a wide range of products such as Chemicals, Solvents, Water, and Oils. The SEM-10 has a flow range of 2 to 30 GPM with a maximum temperature of 150 degrees F and pressure rating of 60 PSI. This meter is light weight and features a large 0.7" LCD displays for easy readout. One touch operation, easy calibration, accurate to pluss or minus .5%. Available in 90 Degree in/out or straight thru design. Not recommended for Gasoline or any other flammables. |
| |
| Sotera Plastic Meters |
| The Sotera Model 825 mini-bulk meter has 1" national pipe threaded inlet and outlet, and can operate between 2 and 20 gallons per minute, up to 120 psi. The meter features push-button re-calibration, when changing products to be metered. |
| |
| Polypropylene Ball Valves |
| Murray Equipment offers Polyproplylene 1/4 turn Ball Valves made with 35% glass filled polypropylene, Teflon seats and Viton o-rings. The valves maximum operating pressure is 125 psi at 70 degrees Fahrenheit, or 75 psi at 150 degrees Fahrenheit. Valves sizes are 1/2", 3/4", 1", 11/4", 11/2", 2", and 3". Valves can be equipped with a delivery spout, and can be full-port or standard port. |
| |
| Five Gallon Test Cans |
| 5 Gallon Certified (Stainless Steel) and 5 Gallon Non-Certified (Plastic)for calibration of meters. |
| |
| |
|
|
|
|
|
| |
