|
Murray Chaser!
|
|
|
|
|
Bulk Transfer Pumps
|
|
Bulk tranfer liquid pump assemblies for industrial, agricultural chemicals and fertilizer solutions. We offer a numerous styles of pumps to fulfill your liquid handling needs. |
|
| Select a Sub-Group from the list or scroll to
browse. |
|
|
| |
| Pumps - MP |
| MP Flomax pumps are available in self-priming and straight centrifugal, and bothsingle and double sealed pumps. They are available in cast iron and also stainless steel. Sizes range from 3/4" through 4" and may be powered by hydraulic, gasoline engine, power take off, or electric motor. MP BASIC PUMP FLOW RATES (BASED UPON WATER, FULL IMPELLER, & 3600 RPM): FLOMAX 5 = UP TO 110 GPM, FLOMAX 8 = UP TO 140 GPM, FLOMAX 10 = UP TO 190 GPM, FLOMAX 15 = UP TO 280 GPM, FLOMAX 15 WITH 5 BLADE IMPELLER = UP TO 300 GPM, SERIES 120 =UP TO 200 GPM, SERIES 300 = UP TO 500 GPM, AND THE SERIES 700 = UP TO 600 GPM. |
| |
| Pumps - Labour |
| Labour pumps are available in a variety of sizes and seal configurations. They meet ANSI specifications, and have flanged inlets and outlets. Labour pumps are available in ductile iron and in 316 stainless steel, and other materials of construction can be specified, so as to match the best pumping solution to meet your application needs. |
| |
| Pumps - Deming |
| Murray Equipment stocks the Deming 4021 3M pump with 8 5/8" impeller, 9 1/2" impeller, or 10" impeller. The cast iron Deming pump has 4" flanged inlet and 3" flanged outlet,double mechanical seal and is capable of producing 450 gallons per minute. |
| |
| Pumps - Gorman Rupp |
| Gorman Rupp makes a variety of single & double sealed pumps suitable for almost any application. For example, the popular Gorman Series 80 3" is an excellent low-rpm high performance long-lived transfer pump, capable of producing 275 gallons per minute at 1750 rpm and 40 feet of head. Murray Equipment also carries the Gorman 10-Series trash pumps, which feature a clean-out plate on the front of the volute. |
| |
| Pumps - Banjo |
| Murray Equipment stocks Banjo's 316 stainless steel self-priming centrifugal pumps. They can be obtained with electric motors, hydraulic motors, gasoline engines, or with an adaptor for close-coupling to an engine or a motor. The expected pump flow rates, based upon water, 2" = 120 GPM and the 3" = 250 GPM. |
| |
| Pumps - Blackmer |
| Murray Equipment stocks Blackmer 2" and 3" positive displacement rotary vane pumps for liquid ammonia (Blackmer LGL pumps); and 2", 21/2", 3, and 4" rotary vane pumps for clear liquids such as fuel oils, alcohols, diesel fuel, gasoline, glycol, and many other petroleum products and solvents (Blackmer GX pumps). The pumps can be obtained seperately, or with gear reducers, or mounted to a bedplate complete with a motor. Additionally, we stock repair parts and relief valves for the Blackmer pumps. |
| |
| Pumps - Ranger |
| Ranger gear pumps are often used on transport trucks for petroleum delivery or liquid feed. They also make excellent stationary pumps for viscous liquids. The pumps may be ordered by themselves, or as a complete assembly on a bedplate with a gear reduction assembly and motor. Additionally, repair parts for the pumps can be obtained. Ranger pumps have flow rates 20-170 GPM at RPM's 200-750 all are depended upon the product being pumped. Maximum pressure of 125 PSI and Temperature rating of 212 degrees F with Buna-N mechanical seals. |
| |
| |
|
|
|
|
|
| |
|
|
|
|
