Ball Valves
|
|
Murray Equipment has a wide variety of ball valves ranging in size from 1/4" through 3", made in Stainless Steel, Polypropylene, Bronze, Carbon Steel, and PVC. We can also supply air actuated, 12 volt, or 120 volt actuators. |
|
| Select a Sub-Group from the list or scroll to
browse. |
|
|
| |
| Stainless Steel Ball Valves |
| Inline stainless steel ball valves are constructed of all 316 stainless steel, with replaceable Teflon seats and stem seals. The valves have lockable handles, and are rated for service up to 1000 psi water, oil or gas. The valves have a full port design, and therefore present no restriction of flow. |
| |
| Polypropylene Ball Valves |
| Murray Equipment offers Polyproplylene 1/4 turn Ball Valves made with 35% glass filled polypropylene, Teflon seats and Viton o-rings. The valves maximum operating pressure is 125 psi at 70 degrees Fahrenheit, or 75 psi at 150 degrees Fahrenheit. Valves sizes are 1/2", 3/4", 1", 11/4", 11/2", 2", and 3". Valves can be equipped with a delivery spout, and can be full-port or standard port. |
| |
| Polypropylene Angle Ball Valves |
| Polypropylene Angle Ball Valves simplify loadout or mini-bulk tank filling. The MEV valves have a 45 degree spout while the Banjo valves have a 90 degree spout.The angle valves are available for connection to 1", 11/2", and 2" hoses. |
| |
| Dead Man Ball Valves |
| The Apollo stainless steel valve with spring return handle provides a positive shut-off unless it is manually held open. Sizes are available in 1/2", 3/4" and 1" |
| |
| Flanged Stainless Ball Valves |
| Flanged fire safe valves are flanged and heve teflon seats, along with a fuseable line for fire protection. |
| |
| Brass Ball Valves |
| Murray Equipment carries brass ball valves from sizes 1/2" through 2" in a non-locking design. Locking valves are available upon request. Rated for 600 PSI. |
| |
| |
|
|
|
|
|
| |
